NEW DESIGN !!!
Multidirectional traction plate made of 3.5 mm thick AISI 316L stainless steel.
The ROCK Ø10 plate has now become a classic in the world of mountaineering and climbing.
Appreciated and used by now on all the cliffs in the world, it is chosen for its characteristics of resistance, practicality (the large hole allows the comfortable introduction of two carabiners simultaneously) and for its decidedly low cost .
The surface is made of opaque light gray color to make the plate as less visible as possible ; the visual effect is reduced therefore the environmental impact is also reduced.
Ideal for mountaineering, climbing and rescue.
IMPORTANT NOTE :
Since 2013 all the material that makes up the majority of our anchors is in AISI 316L stainless steel, much more resistant to marine corrosion than the previous AISI 304. To indicate this difference, the corresponding abbreviation is printed on each item.
Attention: the anchor also exists in the "marine" version, extremely resistant to salt corrosion. In order to highlight the difference between AISI 316L stainless steel and the marine version of the same material, we have designed to mark the anchors with an icon represented by a stylized fish with the inscription " INOX " inside.
Finally, we suggest reading the attached document in this regard, where all the problems on marine corrosion are explained in a fairly comprehensive way.
MARINE version: Art.110M
Rt = 27 Kn Ra = 25 Kn
Weight gr. 45